About Design
Make an IP camera smaller than smaller

Small but powerful design is our purpose. We combines the suggestions of most people to design the TT520PW hidden IP camera. Its size just amounts to a adult thumb, more than that, we integrate Hd video processing power into such a small size. This make it able to meet the requirements of most people. We hope you will find this pocket IP camera’s capabilities present surprise.

” When we designed the TT520PW, we had to make sure didn’t reduce its stability while reducing its size, fortunately, we finally made it. “
Tim Zhang,
The Titathink CEO

Design Idea

Over the years, We have learned that lots of our customers need a camera which is builted in a variety of features but easy to D.I.Y. And provides stable, clear and smooth video. By using such a camera, they are able to keep eyes on all the things they care about. So in order to satisfy our customers’ requirements, We designed it in a new way with high-end subassemblies and a small size.

Regards to the appearance

We are high on the industrial art and try to integrates it into our camera. We hope titathink camera can possess a simple surface but with a stronger inherent functionality.

In the mainboard

We use a high quality CMOS HD 720P small size sensor that offers high-definition video stream for your anywhere in real time. Built-in self-developed video processing technology to make the video more clear and the color more realistic. Built-in self-developed network transmit technology to let users experience outstanding quality video with 720P full resolution at 30 fps.


Built-in Micro SD memory card slot with maximum capatity up to 128Gb. It also supports NAS or NVR drives.

For the main unit
The friendly appearance is the beauty of simplicity

Before design it, we try a lots of testes and researches to design a better outer casing. How did we do it? It was not easy for just Titathink to develop the best the optimum solution, so we invited partners from the Netherlands to design it together. The composite board and low-dissipation master chip makes TT520PW stable and allows more space-saving. This allowed us to design the outer casing to be more suitable for artistic inclinations.

Small logo & Smooth surface – Covered by the superior baking varnish, Logo is so small that it doesn’t affect the appearance.
Waterproof & Freezeproof – It can work as normal, even at snowy day. Operating temperature: -20 to +60 °C (-4 to +140 °F).
All-metal fuselage – better heat dissipation and be stronger and unzerbrechlich.

Tiny lens, but with powerful

We use a hign quality lens with a small size to design entire lens of TT520PW. In order to reducing the size, we decide to replace the most of components to all-in-one chip to make PCBA smaller.

30 x 31 mm

Lens’s size

20 feets

The length of lens cable

A varity of mounting hardwares

TT520PW’s mounting hardware supports two type of installations. One is help to fix on the wall, the other one is used for placing onto the peep hole of door. View the installation article

Mounting the lens unit onto the wall with wall mounting bracket accessories.

Mounting the lens unit onto the peep hole with peep hole mounting bracket accessories.

Q: Can this camera be fixed onto the wall?

A: Of course yes, TT520PW comes with a wall mouting hardware and some screws to help you fixxing the lens of TT520PW camera.

Q: Can the TT520PW rotate once I fix its mounting hardware?

A: No. The mounting hardware of TT520PW does not have supporting roller, it just can help you to fix the lens unit onto wall or peep hole.

Q: It TT520PW waterproof?

A: No. TT520PW does not support IP66-rated or IP67-rated. Its sealing isn’t insufficient to proof the water, so please don’t put it into the water.

Q: How to install the camera?

A: There are some figures and introduction of TT520PW camera. Learn more about installation
Next section

Outstanding and stabilized performance

Learn more about Performance
  • No products in the cart.