How TT730LPW Works?
2. Setup camera before starting to use
In this section, we will show you how to setup TT730LPW before watching the live feed on the internet.
1 – Some tips before starting …The TT730LPW Video Monitor connects to your network either through Wi-Fi or network cable or PoE.TT730LPW supports both Android and iOS devices with Babelens app.For better security you can change the default password for your TT730LPW, and create other login account to restrict its privilege.The TT730LPW video monitor can be used with home plugs or wi-fi range extenders should you need to cover excessive distance.
2 – You will also need …
Do not demand too much, there are something that lying around now.
An iOS/Android device
iPhone, iPad or iPod Touch.Must be running iOS5 or later. Android phone or Android tablet. Must be running Android 2.2.4 or later.
A spare ethernet port on your router
Just for setup. Your router was most likely given to you by your internet provider.
Your Wi-Fi Password to your home network
For the same router your Babelens is plugged into. Not needed for network cable connection.
3 – Plugging in the monitor…
Power up and connect the monitor to your router1). Plug the provided Ethernet cable into a spare ethernet port on your router.2). Plug the other end of Ehternet cable into the ethernet port on the back of the babelens video monitor.3). Plug the Power cable into the power socket on the back of the babelens video monitor.
4 – Connect your smartphone to your wi-fi network
If your smartphone has already connected to wifi network, you can be inattentive on this step.Note: This should be the same Wi-Fi network being broadcast from the router in Step 1.
5 – Download the app and install app into your smartphone.
Search for “Anyscene” or scan the QR code to get to the download page. and then download the app and install it right now. Learn more Anyscene
6 – Run the babelens app and add your camera.
There are two ways to add TT730LPW to your Anyscene APP.
Press “Search” to scan the camera on the same network.
Press the camera you found to connecting.
Press “QRCode” to scan the QR code on the back of camera.
7 – Enther the password and then press “Connect”.
Note: Both Default username and Default password are “admin”.
8 – Setup the Wi-Fi connection by pressing “Setup WIFI”.
9 – Choose your Wi-Fi SSID.
After this, press “Save” to save your setting.
10 – Press the camera and start to view the video.